TRANSIT TACTILE WARNING SURFACES

ADA Compliant Tile for Transit Facilities

ADA Solutions, Inc., has set the industry standard for all detectable warning surfaces for over two decades. We understand and cater to the specific needs of Transit Facilities for both new and existing concrete substrates. Thus, we offer a line of detectable warning products exclusively designed for the needs of Transit Facilities.

All of our truncated dome tactile warning surfaces are in full compliance with the American Disabilities Act Accessibility Guidelines (ADAAG). ADA Solutions Inc., products are approved for use by all major municipalities; DPW’s and state DOT’s. In test after test our products exceed the most stringent requirements for Water Absorption, Slip Resistance, Wear and Weather Resistance, Compressive Strength, Chemical Resistance, UV stability, and Detectability.

Our detectable warning tiles are in most major Transit Authorities throughout the US and in other countries.

Heavy Duty Cast-in-Place Replaceable Tactile

Heavy Duty Cast-in-Place Replaceable Tactile is made of a durable exterior grade homogenous glass, carbon, and fiberglass reinforced composite material which is colorfast and UV stable. The Heavy Duty Cast-in-Place Replaceable Tactile is used is used primarily for new Transit Facility applications and is the only 100% replaceable Detectable Warning product on the market.

3–Part Heavy Duty Cast-in-Place Replaceable Tactile Product Specification: 

Staggered Dome Surface Applied Tactile

Staggered Dome Surface Applied (Retrofit) Tactile is made of a durable exterior grade homogenous glass, carbon, and fiberglass reinforced composite material which is colorfast and UV stable. The Staggered Dome Surface Applied (Retrofit) Tactile is used primarily to retrofit over an existing concrete substrate in Transit Facility applications.

3–Part Staggered Dome Surface Applied Tactile Product Specification: 

In-Line Surface Applied Tactile

In-Line Surface Applied (Retrofit) Tactiles are made of a durable exterior grade homogenous glass, carbon, and fiberglass reinforced composite material which is colorfast and UV stable. The In-Line Surface Applied (Retrofit) Tactiles are available in both Butt Joint and Ship Lap Tactiles and are primarily to retrofit over an existing concrete substrate in Transit Facility applications.

3–Part In-Line Surface Applied Tactile Product Specification: 

Staggered Dome Cast-in-Place Tactile

Staggered Dome Cast-in-Place Tactile is made of a durable exterior grade homogenous glass, carbon, and fiberglass reinforced composite material which is colorfast and UV stable. The Staggered Dome Cast-in-Place Tactile is used primarily for new Transit Facility applications.

Staggered Dome Cast-in-Place Tactile Product Specification: 

Transit Surface Applied Installation Instructions | Chem Link M-1 Adhesive- Sealant Installation Instructions

For more information Contact one of our Transit Specialists at (800) 372-0519 or Email Us.

Clik the images below to see a gallery of some of our Transit installations: