Frequently Asked Questions

Yes. Since the mid 1980’s ADA Solutions has been manufacturing the highest-quality detectable warning products in the world. All of ADA Solution’s products adhere to ADAAG and PROWAG requirements.
The current guideline requires the detectable warning surface to begin 6” to 8” from the back of the curb extending 24” or 2 feet in the direction of travel. To learn more about the various regulations related to detectable warning surfaces please visit our Government Regulations Page, or call us anytime at (800) 372-0519.
Yes. We offer two solutions. First, you can take our FREE online course. Or, for larger firms, we offer on-site learning sessions. Please call (800) 372-0519 to arrange a site visit by one of our AIA Approved Facilitators.
ADA Solution’s uses the most advanced homogenous glass and carbon reinforced composite to create a colorfast and U.V. stable product. Each truncated dome is fiberglass reinforced for enhanced durability. The color is uniform throughout, and does not rely on a surface coating (paint) to achieve color stability.
No. The larger holes in the sides of the embedment flanges of the cast-in-place product are designed to let concrete flow through to securely anchor the product in the fresh concrete.
Fasteners and adhesive are included with each tile. Purchase a quality sealant (Sonneborn NP1 or equivalent) to seal the entire perimeter of installed tactile to finish the installation.
ADA Solution’s brochure contains detailed installation instructions for all of our detectable warning systems. Ask your local distributor or call (800) 372-0519 to request a brochure.

The following detailed instructions are also available for download:


ADA Solutions is the only detectable warning manufacturer to offer both 1.67” and 2.35” center to center spacing. Please call (800) 372-0519 to discuss available sizes, colors and dome spacing.
ADA Solution’s manufactures all of our truncated domes to measure .20”
ADA Solutions prides itself on maintaining the highest levels of inventory in the (6) most popular colors used nationwide: Yellow, Clay-Red, Brick-Red, Black, Gray and Blue should be available for immediate shipping.

Please call (800) 372-0519 with any questions.
Yes. ADA Solutions manufactures custom colors. Please call us at (800) 372-0519 to discuss your custom color needs.
No. ADA Solution’s uses the most advanced composite materials that are not affected by extreme low or high temperatures.

For additional information refer to our Product Test Data.
No. Lab testing shows that salt will not affect the composite material used to manufacture ADA Solution’s detectable warning tiles. In fact, chewing gum and even spray paint can be removed without staining ADA Solution’s detectable warning tiles.
No. Due to the instability of the asphalt surface we do not recommend it for the application of surface mounted detectable warning tiles. For a long term solution, we recommend pouring a concrete footer and installing ADA Solution’s cast-in-place or replaceable cast-in-place system.
"Sound on cane" is an important element of ADA Solution’s detectable warning tile design. The visually impaired, and blind, rely on audible cues from their cane as they sweep it in front of them. ADA Solution’s composite material and proven design features enhance sound attenuation making them the best choice for true detectability.
ADA Solution’s cast-in-place, retrofit, and radius systems can be cut in the field. Use a continuous rim diamond blade or a 32 tooth carbide tip blade to cut the tiles. We do not recommend cutting the straight replaceable tiles. Please call (800) 372-0519 for more information.
ADA Solution’s detectable warnings are sold through local distribution. Please call (800) 372-0519 with any questions.

Find a distributor near you.
Please contact us at (800)372-0519 and we will submit our products to the necessary department for approval.
Use a half-inch countersink bit to create a recess in any of the existing truncated domes. Install the fastener as provided. Please call (800)372-0519 with any questions.
We recommend cutting the bevel off and measure to keep the domes properly spaced. Then simply caulk the joint between the tiles.

Please call (800) 372-0519 to speak with speak with an experienced professional.
Installation of successive replaceable tactile units requires specific installation procedures. Please read through our Replaceable Installation Instructions or call (800) 372-0519 with any questions.
Yes. The adhesive requires temperatures of 30 degrees F and rising to allow for proper curing.

For new construction we recommend the cast-in-place, or cast-in-place replaceable systems. The cast-in-place and cast-in-place replaceable systems allow for an earlier completion date – saving you time and money. The surface mounted system is used to retrofit existing concrete ramps.

Please call (800) 372-0519 to discuss the best detectable warning solution for your current and future jobs.

You will require a rubber mallet, as well as edging and finishing tools. Also, a razor knife for removing the plastic protective covering after installation. Please read through our Cast-In-Place Installation Instructions or call (800) 372-0519 with any questions.
ADA Solution’s radius replaceable and radius retrofit systems are designed to save you time and money. No more wasted material or manpower. Learn more about our line of Radius Products or call (800) 372-0519 for more radius system information.